Experimental. Single [[colour ?]] [shape]-shaped crystals of [compound name] were [obtained by / used as supplied]. A suitable crystal with dimensions [?] × [?] × [?] mm was selected and mounted on a [DIFFRACTOMETER MODEL] diffractometer. The crystal was kept at a steady T = [TEMP] K during data collection. The structure was solved with olex2.solve 1.5 (Bourhis et al., 2015) using iterative methods and by using Olex2 1.5 (Dolomanov et al., 2009) as the graphical interface. The model was refined with olex2.refine 1.5 (Bourhis et al., 2015) using full matrix least squares minimisation on |F|2.
Crystal Data. [FORMULA], Mr = [MR], [CRYSTAL SYSTEM], [SPACE GROUP] (No. [SG_NO]), a = [A] Å, b = [B] Å, c = [C] Å, β = [BETA]°, α = γ = 90°, V = [V] Å3, T = [TEMP] K, Z = [Z], Z′ = [ZPRIME], μ(Mo Kα) = [MU], [NREFL_MEAS] reflections measured, [NREFL_UNIQUE] unique (Rint = [RINT]) which were used in all calculations. The final wR2 was [WR2_ALL] (all data) and R1 was [R1_I2SIG] (I≥2σ(I)).
| Compound | [COMPOUND] |
|---|---|
| Formula | [FORMULA] |
| Dcalc./ g cm−3 | [DCALC] |
| μ/mm−1 | [MU] |
| Formula Weight | [FW] |
| Colour | [[colour ?]] |
| Shape | [SHAPE] |
| Size/mm | ? × ? × ? |
| T/K | [TEMP] |
| Crystal System | [CRYSTAL SYSTEM] |
| Flack Parameter | [FLACK] |
| Hooft Parameter | [HOOFT] |
| Space Group | [SPACE GROUP] |
| a/Å | [A] |
| b/Å | [B] |
| c/Å | [C] |
| α/° | 90 |
| β/° | [BETA] |
| γ/° | 90 |
| V/Å3 | [V] |
| Z | [Z] |
| Z′ | [ZPRIME] |
| Wavelength/Å | [WAVELENGTH] |
| Radiation type | Mo Kα |
| Θmin/° | [THETA_MIN] |
| Θmax/° | [THETA_MAX] |
| Index range h | [H_MIN] ≤ h ≤ [H_MAX] |
| Index range k | [K_MIN] ≤ k ≤ [K_MAX] |
| Index range l | [L_MIN] ≤ l ≤ [L_MAX] |
| Measured Refl′s. | [NREFL_MEAS] |
| Indep′t Refl′s | [NREFL_UNIQUE] |
| Refl′s I≥2σ(I) | [NREFL_I2SIG] |
| Rint | [RINT] |
| Parameters | [NPARAMS] |
| Restraints | [NRESTRAINTS] |
| Largest Peak/eÅ3 | [PEAK_MAX] |
| Deepest Hole/eÅ3 | [PEAK_MIN] |
| GooF | [GOOF] |
| R1 (I≥2σ(I) / all) | [R1_I2SIG] / [R1_ALL] |
| wR2 (I≥2σ(I) / all) | [WR2_I2SIG] / [WR2_ALL] |
A [[colour ?]] [shape]-shaped crystal with dimensions [?] × [?] × [?] mm was mounted. Data were collected using a [DIFFRACTOMETER] diffractometer operating at T = [TEMP] K.
Data were measured using ω scans with Mo Kα radiation. The diffraction pattern was indexed and the total number of runs and images was based on the strategy calculation from the program CrysAlisPro [VERSION] (Rigaku Oxford Diffraction, [YEAR]). The maximum resolution achieved was Θ = [THETA_MAX]° ([D_MIN] Å).
The unit cell was refined using CrysAlisPro on [NCELL_REFLS] reflections, [CELL_PERCENT]% of the observed reflections.
Data reduction, scaling and absorption corrections were performed using CrysAlisPro. The final completeness is [COMPLETENESS]% out to [THETA_MAX]° in Θ. A multi-scan absorption correction was performed using CrysAlisPro. The absorption coefficient μ of this material is [MU] mm−1 at this wavelength (λ = [WAVELENGTH] Å) and the minimum and maximum transmissions are [TRANS_MIN] and [TRANS_MAX].
The structure was solved in the space group [SPACE GROUP] (# [SG_NO]) by olex2.solve (Bourhis et al., 2015) using iterative methods. It was refined by full matrix least squares minimisation on |F|2 using olex2.refine (Bourhis et al., 2015). All non-hydrogen atoms were refined anisotropically. Hydrogen atom positions were calculated geometrically and refined using the riding model.
_exptl_absorpt_process_details: CrysAlisPro [VERSION] (Rigaku Oxford Diffraction, [YEAR]) using spherical harmonics as implemented in SCALE3 ABSPACK.
There is a single formula unit in the asymmetric unit, which is represented by the reported sum formula. In other words: Z = [Z] and Z′ = [ZPRIME]. The moiety formula is [MOIETY_FORMULA].
The Flack parameter was refined to [FLACK]. Determination of absolute structure using Bayesian statistics on Bijvoet differences using the Olex2 results in [HOOFT]. The chiral atoms in this structure are: [CHIRAL_ATOMS]. Note: The Flack parameter is used to determine chirality of the crystal studied; the value should be near 0. A value of 1 means that the stereochemistry is wrong and the model should be inverted. A value of 0.5 means that the crystal consists of a racemic mixture of the two enantiomers.
_diffrn_special_details: [DIFFRN_SPECIAL_DETAILS]
_olex2_refine_details: [OLEX2_REFINE_DETAILS]
Figure 1 Packing diagram of [COMPOUND] viewed along the c axis
Wilson Plot
Cumulative Intensity Distribution
Systematic Absences Intensity Distribution
Completeness Plot
I/σ(I) vs. Resolution
Fobs vs Fcalc
Normal Probability Plot
Table 1: Fractional Atomic Coordinates (×104) and Equivalent Isotropic Displacement Parameters (Å2×103) for [COMPOUND]. Ueq is defined as 1/3 of the trace of the orthogonalised Uij.
| Atom | x | y | z | Ueq |
|---|---|---|---|---|
| O3 | −1317.5(16) | 9603.0(14) | 8773.5(10) | 23.4(3) |
Table 2: Anisotropic Displacement Parameters (×104) for [COMPOUND]. The anisotropic displacement factor exponent takes the form: −2π2[h2a*2 × U11+ ... +2hka* × b* × U12]
| Atom | U11 | U22 | U33 | U23 | U13 | U12 |
|---|---|---|---|---|---|---|
| O3 | 27.7(6) | 21.4(7) | 23.5(6) | −0.5(5) | 10.6(5) | −0.4(5) |
Table 3: Bond Lengths in Å for [COMPOUND].
| Atom | Atom | Length/Å |
|---|---|---|
| O3 | C1 | 1.452(2) |
| O3 | C6 | 1.4197(19) |
| Atom | Atom | Length/Å |
|---|---|---|
| O111 | C7 | 1.439(2) |
Table 4: Bond Angles in ° for [COMPOUND].
| Atom | Atom | Atom | Angle/° |
|---|---|---|---|
| C6 | O3 | C1 | 115.80(13) |
| Atom | Atom | Atom | Angle/° |
|---|---|---|---|
| O111 | C7 | O6 | 110.85(12) |
Table 5: Torsion Angles in ° for [COMPOUND].
| Atom | Atom | Atom | Atom | Angle/° |
|---|---|---|---|---|
| O3 | C1 | C2 | O2 | −56.95(15) |
| Atom | Atom | Atom | Atom | Angle/° |
|---|---|---|---|---|
| C5 | C6 | O111 | C7 | −129.69(13) |
Table 6: Hydrogen Fractional Atomic Coordinates (×104) and Equivalent Isotropic Displacement Parameters (Å2×103) for [COMPOUND]. Ueq is defined as 1/3 of the trace of the orthogonalised Uij.
| Atom | x | y | z | Ueq |
|---|---|---|---|---|
| H2 | −2230(30) | 9215(7) | 11043(9) | 54.9(5) |
Rigaku Oxford Diffraction ([YEAR]).
L.J. Bourhis, O.V. Dolomanov, R.J. Gildea, J.A.K. Howard and H. Puschmann, The Anatomy of a Comprehensive Constrained, Restrained, Refinement Program for the Modern Computing Environment — Olex2 Dissected, Acta Cryst. A, (2015), A71, 59–71.
O.V. Dolomanov, L.J. Bourhis, R.J. Gildea, J.A.K. Howard and H. Puschmann, Olex2: A complete structure solution, refinement and analysis program, J. Appl. Cryst., (2009), 42, 339–341.